SCL_EFP=50_NS_GLITCH_FILTER, SCL_EHD=STANDARDFAST_MODE, SDA_EFP=50_NS_GLITCH_FILTER, SDA_EZI=DISABLED, SCL_ZIF=ENABLE_INPUT_FILTER, SCL_EZI=DISABLED, SDA_ZIF=ENABLE_INPUT_FILTER, SDA_EHD=STANDARDFAST_MODE
Pin configuration register for I2C0-bus pins
| SCL_EFP | Select input glitch filter time constant for the SCL pin. 0 (50_NS_GLITCH_FILTER): 50 ns glitch filter 1 (3_NS_GLITCH_FILTER): 3 ns glitch filter |
| RESERVED | Reserved. Always write a 0 to this bit. |
| SCL_EHD | Select I2C mode for the SCL pin. 0 (STANDARDFAST_MODE): Standard/Fast mode transmit 1 (FAST_MODE_PLUS_TRANS): Fast-mode Plus transmit |
| SCL_EZI | Enable the input receiver for the SCL pin. Always write a 1 to this bit when using the I2C0. 0 (DISABLED): Disabled 1 (ENABLED): Enabled |
| RESERVED | Reserved |
| SCL_ZIF | Enable or disable input glitch filter for the SCL pin. The filter time constant is determined by bit EFP. 0 (ENABLE_INPUT_FILTER): Enable input filter 1 (DISABLE_INPUT_FILTER): Disable input filter |
| SDA_EFP | Select input glitch filter time constant for the SDA pin. 0 (50_NS_GLITCH_FILTER): 50 ns glitch filter 1 (3_NS_GLITCH_FILTER): 3 ns glitch filter |
| RESERVED | Reserved. Always write a 0 to this bit. |
| SDA_EHD | Select I2C mode for the SDA pin. 0 (STANDARDFAST_MODE): Standard/Fast mode transmit 1 (FAST_MODE_PLUS_TRANS): Fast-mode Plus transmit |
| SDA_EZI | Enable the input receiver for the SDA pin. Always write a 1 to this bit when using the I2C0. 0 (DISABLED): Disabled 1 (ENABLED): Enabled |
| RESERVED | Reserved |
| SDA_ZIF | Enable or disable input glitch filter for the SDA pin. The filter time constant is determined by bit SDA_EFP. 0 (ENABLE_INPUT_FILTER): Enable input filter 1 (DISABLE_INPUT_FILTER): Disable input filter |
| RESERVED | Reserved |